C2 v3 is based on the same pure monomolecular silicium as C1 Crystal Lacquer and provides a non-yellowing, high gloss, dirt repelling coating that cross-links with all surfaces of your vehicle including bodywork, glass and trim. This sealant provides long lasting protection and exceptionally easy non smearing application.

Features & Benefits:

• Ultra long lasting quick detail spray
• Easy to use – non-smear formula
• One thin layer provides gloss & protection
• Lasts up to 8 months!!
• Will not react with re-painted surface
• Can be layered to hide minor surface imperfections such as marring
• To use as drying aid dilute 1:2 & spray onto wet surface prior
• Supplied trigger spray.

Coverage: 80m2 per litre

Instructions for use:

Prepare the surfaces to be treated (C2 v3 works on all substrates including paint, GRP, glass, metal, rubber and plastics) by washing with a wax-free pH-neutral shampoo to remove organic dirt such as grease, soot, wax and polish residues, rinse thoroughly and then dry using a drying towel.

Wipe C2 v3 onto all surfaces using a microfibre cloth and dry using a clean microfibre cloth. Do not apply in direct sunlight or allow to dry. By applying slight hand pressure when drying C2 v3 offers longer adhesion and higher gloss levels. One pass and a single thin layer is all that is required.

Maintenance
A single application of C2 v3 offers up to 8 months protection. C2 v3 does not require any special maintenance routine and being inorganic will cause no adverse reaction with any other product. For very best results use a 1:20 dilution of C2 v3 as a quick detailer (spray onto surfaces just prior to drying) once every 3 washes. C2 v3 can also be layered to hide minor surface imperfections (e.g. marring on soft lacquers).